GPS, UPS, Switches and other devices cables and adapters schematics

• Citizen printers RS-232 DB9F -DB25M cable for Citizen printers only
• CoStar/DYMO LabelWriter RS-232 Cable Used on the DYMO/CoStar LabelWriter thermal printers that connect through RS-232.
• DSC PC-Link Connector For Programming DSC Alarm Panels with DLS Software
• Gyro Point II Base station PS/2 Cable schematic PS/2 (6 pin mini Din) - Gyro Point II (6 pin RJ12)
• HP printer serial cable Serial cable between Intel Netport ExpressXL and HP LaserJet printer
• LS 2208 Scaner to PS/2 connector adapter for connecting barcode scanner to ps/2 interface
• LSC CodeLink cable used to upload software from PC to LSC lighting product
• Mac to HP48 cable
• NCR serial powered port This is the cable connector for NCR powered serial connector, as found on the realpos series.
• Panasonic KX-TD1232 (DSHS) - PC cable RS-232C cable for connect PBX Panasonic KX-TD1232 (DSHS) with PC
• PathfindIR Thermal Imager Module (OEM or BMW NightVision) PathfindIR Thermal Imager Module (OEM or BMW NightVision)
• RS-422 ADAT sync cable Alesis ADAT synchronization cable
• Uniden BC245XLT scanner interface cable
• Uniden BC246T/BR330T/BCD396T/BC346XT/BCD396XT/BCT15/BCD996T scanners interface cable
• Uniden Bearcat BC250D, BC296D, UBC-3300XLT Scanner PC Programming Cable
• USB 2.0 Disk connector cable Cable wiring diagram for USB cables used on some portable HDD cases.

APC pinouts

• APC Smart UPS cable Cisco console Adapter pinout Should work with APC UPSs that use the following cables: APC Part# 940-0024C, # 940-0024D or 940-1524(black cable) This is to plug a Cisco console (rollover) cable into.

Net pinouts

• ADC Pairgain 310F and 320F console used to connect PC to ADSL modem console
• Adtran CSUs RJ45 to DB9 cable e.g. works with Adtran MX2800
• Adva FSP150c 825 RS232 ethernet switch console cable Adva FSP150c 825 RS232 ethernet switch console cable
• Allied Telesyn/Network iQ1000 router serial port cable serial port for configuring router
• Baytech RPC-3 to DB9 serial port adapter Baytech RPC-3 RJ45 to DB9 null modem serial cable
• Console cable for NetServer8/16
• Corecess ADSL DSLAM DX6524 console cable Console cable for Corecess ADSL DSLAM DSLlinX-6524 and some other.
• Dell PowerEdge 1855/1955 DRAC/MC console cable Just very slightly different than a normal DCE-DCE crossover cable.
• Intel 100FX, express router 9100 switches console cable
• NetApp filer head serial console cable
• RAD console cable (25 pin) Console cable for configuring RAD´s devices (e.g. FPS-8). This is cable supplied with RAD FPS-8 switch. The pinout of the cable in manual is wrong. Provided here is a real pinout.
• RAD console cable (9 pin) Console cable for configuring RAD´s devices (e.g. FPS-8). This is non-standard cable, because RAD FPS-8 switch is supplied with DB-25 - RJ-45 cable. Most of modern computers have no 25 pin COM-ports.

obsolete computers pinouts

• White Console to PA-RISC computers cable

UPS pinouts

• Ablerex Troy 600 UPS cable Shutdown Cable with UPSee software. Should work with Troy 800
• APC BackUPS CS/ES smart signalling cable original 940-0128A and analogue of the 940-0128A
• APC BackUPS dumb cable (on-battery only) APC Part# - 940-0023A
• APC BackUPS ES (old) cable wiring APC part # 940-0119A
• APC BackUPS Office (old) cable APC Part# 940-0119A
• APC BackUPS Pro cable APC Part# 940-0095B. Should work with APC PowerChute Pro software.
• APC BackUPS Pro PNP cable APC part # 940-0095A
• APC BackUPS XS1000, BX-1000 and some others cable wiring APC part# 940-0128D
• APC Dumb UPS cable (simple) APC Part# 940-0020 (grey cable). Should work with APC PowerChute Plus software.
• APC rack mount Smart-signalling DB9 cable part #940-1524C. Same usage as 024C but the length is 5meter
• APC RJ12 serial cable part # 940-0144A
• APC Smart UPS cable APC Part# 940-0024C, # 940-0024D or 940-1524(black cable). Should work with APC PowerChute Plus, PowerChute V/S, PowerChute Pro software & Apcupsd(UPS Server 3.x for Linux)
• APC USB cable schematic APC part# 940-0127B and 940-0127E
• Belkin F6H500 UPS cable UPS to PC shutdown cable
• Invertomatic-Victron (IMV) UPS intelligent (serial communication) cable part# VIC-23/2. Works with PowerFLAG software
• Megatech M2501 and M2603 UPS cables Types I, II Used for connecting Megatech inteligent UPS (type I) or smart UPS (type II) to PC
• PowerCom King UPS cable
• Sendon UPS-500 dumb cable Part# M2501. Should work with RUPS for DOS/Windows software
• Tripp-lite OmniPro-450 (675) PowerAlert Cable Part# 73-0724 (BC, Internet Office, OmniSmart UPS). Should work with PowerAlert software.
• Tripp-lite OmniPro-450 (675) WinNT Cable Should work with Windows NT UPS Service
• Tripp-lite SmartPro Cable Part# 73-0743 (SmartPro UPS). Should work with PowerAlert software.